Your shower nozzle has been through it all. The early morning rush when you're running late for that client meeting. The post-gym sessions after a grueling workout. The weekend deep-cleans when you finally have time to pamper yourself. But, all that daily action leaves its mark: soap scum, shampoo residue and hard water stains that seem to appear overnight, especially during peak summer months. Here's how to clean the shower nozzle in your bathroom and keep it sparkling clean. 

Shower nozzles accumulate soap scum and mineral deposits from hard water over time. Daily use with soaps and shampoos causes these residues to build up and block the tiny holes, which reduces water pressure and creates an uneven spray pattern. Keep your shower nozzle flowing smoothly by regularly cleaning it with Cleevo All Purpose Cleaner. Its powerful yet gentle formula dissolves lime scale and soap buildup both on the surface and deep within the nozzle holes. For thorough cleaning, remove the nozzle head and soak it in some detergent solution, then use a soft brush to clear blocked holes and restore optimal water flow without aggressive scrubbing.

Related Articles

How To Remove Stains From Bathroom Tiles 

How To Clean Toilet Wall Tiles 

How To Clean Wash Basin Drain Pipe  

What you need

Cleevo All Purpose Cleaner

Soft brush or old toothbrush

Steps to clean shower nozzle in bathroom   

Step 1: Remove nozzle and clear loose debris 

Unscrew the shower nozzle head from the arm and remove any visible hair, soap chunks, or mineral deposits from the holes. Set aside any rubber washers or small parts.

Step 2: Apply cleaning solution

Spray Cleevo All Purpose Cleaner generously on the nozzle. Focus on areas with heavy lime scale and soap scum buildup.

Step 3: Let the cleaner penetrate 

Allow the cleaning solution to sit for 15-20 minutes to dissolve stubborn mineral deposits and soap residue. This helps soften calcified buildup for easier removal.

Step 4: Scrub and clear blockages 

Using an old toothbrush or soft brush, scrub the nozzle surface and poke through individual holes to clear blockages. Pay special attention to heavily clogged openings.

Step 5: Clean the shower arm connection

Wipe down the shower arm threads and connection point with Cleevo All Purpose Cleaner to remove soap buildup and ensure a proper seal when reassembling.

Step 6: Final rinse and reinstall 

Rinse the nozzle thoroughly under running water to remove cleaning residue and debris, then dry and screw back onto the shower arm for optimal water flow.